Page 71 - Jourdain - Catalogue T38 GB

POWDER COATED POST OCTAGONAL BARE Ø 102 MM
GALVANISED POST EXTERIOR COATED WITH POWDER COATED PAINT TO A HEIGHT OF 1 M.
Powder coating helps to limit corrosion of the steel by aggressive agents. BEWARE of bumps and impacts during handling/installation.
HEADLOCKS
BARRIERS FEED
BARRIERS
POST BRACKETS POSTS AND
AND HINGES HALF BRACKETS
CUBICLE
PINS
CUBICLES
ATTACHMENTS
POSTS AND
CUBICLE
NECK BARS
HAY RACKS
SMALL TROUGHS
FEEDERS AND
CALF PENS
AND MISC.
CATTLE
HANDLING
EQUIPMENT
TR0121 Powder coated post OCTAGONAL BARE Ø 102 mm, L. 2.13 m
TR0124 Powder coated post OCTAGONAL BARE Ø 102 mm, L. 2.43 m
TR0118 Powder coated plate on post OCTAGONAL BARE Ø 102 mm, L. 1.68 m
HEAT-SHRINKABLE SLEEVE
21.1 kg 24.1 kg 19.1 kg
1 M LONG HEAT-SHRINKABLE SLEEVE TO BE FITTED ON 102 MM OCTAGONAL POST.
Crimp the sleeve on the post with a heat gun. BEWARE of bumps and impacts during handling/installation.
TR0101 Heat-shrinkable protection sleeve for post Ø 102 mm 0.66 kg
PLATINUM L-SHAPED OCTAGONAL POST Ø 102 MM
OCTAGONAL POST Ø 102 MM, 1.32 M LONG WITH L-SHAPED PLATE ALLOWING IT TO BE MOUNTED ON A 20 CM WALL.
The concrete must be of good quality to hold the post in place.
TR1675 OCTAGONAL post on L-shaped plate Ø 102 mm, L. 1.32 m 14.6 kg
POST OCTAGONAL BARE TEMPERED Ø 102 MM
OCTAGONAL tempered post Ø 102 mm, to replace a 102 mm round or OCTAGONAL post cut by corrosion, thus allowing to bypass another post-setting operation. TR2180 Post OCTAGONAL BARE L. 2.13 m tempered 21 kg
ACCESSORY
Slat fitting: 12 mm threaded rod part in stainless steel welded to a painted conical steel block, enabling plate posts to be fitted to slat flooring. Grease
the threaded rod and tighten it gently.
FE2544 FE2112 TR0005
Slat fitting, Ø 12 mm - Available in packs of 20 Post backplate
5 L of bituminous paint
0.68 kg 3.6 kg 5 kg
HOW TO REDUCE POST CORROSION?
In order to reduce zinc destruction
and steel corrosion due to prolonged contact with silage, slurry and manure, we recommend that you buy the powder coated post and use the OCTAGONAL double sleeve. Another option is to crimp the heat-shrinkable protection sleeve.
To protect the bottoms of barriers we recommend, before use, the application of an industrial paint composed
of a bonding primer on a galvanised product before application of an epoxy paint, ensuring that the paint is suitable for animal use.
71
HORSE PENS